Cold Fire 32 Ounce Concentrate - 1 Quart One quart will treat any 1.5 or 2.5 gallon standard water-based extinguisher.
Effective on most Class A and B fires, including wood, man-made materials, gas, diesel and other liquid fuels.
Cold Fire® is an environmentally friendly fire extinguishing agent that puts out ANY fire faster, safer, with less water, less damage to property, and less risk to firefighters. Cold Fire cools 21 times faster than water, and works to remove heat and the fuel sources from the fire tetrahedron, preventing re-ignition. Completely 'green' and non-toxic, Cold Fire puts out any Class A or B fire, hydrocarbons or polar solvents, as well as metals, tires, and asphalt. Also suppresses vapors.
COLD FIRE SPECIFICATIONS: UL Classified Wetting Agent UL 2N75 Multiple classifications - foam, wetting agent, surfactant and water enhancer Will extinguish class A, class B, flammable metals and grease fires April 5, 2005. Cold Fire surpasses other products on the US Forestry -Qualified Product List in terms of health & safety hazards and use restrictions Tested according to NFPA 18 Standards EPA SNAP listed (Significantly New Alternatives Policy) for alternatives to toxic foams currently on market Acceptable substitute for toxic foams and Halon 1211 (EPA) Classified by the EPA under Surfactant Blend A Hazardous Materials Identification System (HMIS) rating of 0,0,0 - same as water Cold Fire is NOT a gel 100% soluble in water Can be applied by helicopters with Bambi buckets, used in pumping stations along firelines, and poured directly in brush truck tanks Extinguishes fires (even oil and alcohol-based fires) quickly and on contact; effective on oil well and tanker fires, tire fires, fuel/ethanol fires, grass, brush and forest fires, and metal fires (including magnesium and aluminum) Cold Fire is ONE agent that can replace SEVERAL products
COLD FIRE APPLICATIONS Cold Fire® products are environmentally friendly fire extinguishing agents, leading the way in firefighting technology and revolutionizing the way firefighters combat fires.
Cold Fire® can be used to cool down hot surfaces rapidly for added safety and increased productivity. Cold Fire products can be used in various ways: Various types of wildfires; grass/scrub, brush, heavy timber and related applications Sawdust and slash fires Fire lines creation in wildfires Structure fires Structure protection from wildfires Cool-down of embers on firefighters and other protective applications
Additional protection in controlled burns High oil content foliage, such as palmetto and cedar Tire fires Vehicle fires Paints and oil-based fires Auto fuel fires Fuel storage tanks close to fires (keeping them cool) Prevention of hot spot and fires from hot torch roofing applications Cool-down of equipment Protection of hazardous or explosive material from oncoming fires Creation of a heat barrier to help prevent heat damage and hidden fires Closed loop systems such as sprinkler systems and on-board extinguishing systems
COLD FIRE - COOLING CAPABILITIES Cold Fire has an amazing ability to cool metal down 21 times faster than water, without 'shocking' or damaging the metal. ITS COOLING COMPARISON TEST Each sample of material was heated to 500° using a hand torch, then sprayed with Cold Fire and water. The third element tested was ambient air. Copper:The copper was heated and sprayed for 29.89 seconds. Cold Fire® took 27 seconds to reach 87.378F. It took water 4 minutes, 30 seconds to reach 84.624F. It took air 11 minutes and 6 seconds to reach 95.994F. Our findings show that it took Cold Fire® the least amount of time. Sheet Metal:The sheet metal was heated and sprayed for 15.69 seconds.
Cold Fire® took 14 seconds to reach 84.522F. It took water 4 minutes, 50 seconds to reach 84.538F. It took air 9 minutes and 11 seconds to reach 90.872F. Our findings show that it took Cold Fire® the least amount of time. Graph Glass:The glass was heated and sprayed for 23.47 seconds. Cold Fire® took 31 seconds to reach 84.093F. It took water 2 minutes, 26 seconds to reach 85.821F. Note as the glass cooled after spraying with water the glass cracked. Graph Steel:The steel was heated and sprayed for 48.23 seconds. Cold Fire® took 46 seconds to reach 88.894F. It took water 9 minutes, 17 seconds to reach 89.251F. It took air 8 minutes and 24 seconds to reach 109.25F.
Our findings show that it took Cold Fire® the least amount of time. Note that after the metal was sprayed, the heat went down, then came up in temperature slightly. Copper Time Temp Cold Fire 27 sec. 87.378F Water 4 min, 30 sec. 84.624F Air 11 min, 6 sec. 95.994F Sheet Metal Cold Fire 14 sec. 84.522F Water 4 min, 50 sec. 84.538F Air 9 min, 11 sec. 90.872F Graph Glass Cold Fire 31 sec 84.093F Water 2 min, 26 sec 85.821F Graph Steel Cold Fire 46 sec 88.894F Water 9 min, 17 sec. 89.251F Air 8 min, 24 sec. 109.25F